- 時間：2021-12-07 14:15:16
- 來源：本站
- 瀏覽次數：576
pc板已經逐步的走入了人們的生活了，市場也在不斷的擴大，于是就有些心懷不軌的人混入pc板市場撈一筆，導致pc板市場比較混亂，價格參差不齊，質量也大相徑庭，如何在眾多的產品中挑出質量更好的pc板呢?
The PC board has been gradually into people's lives, the market is constantly expanding, and some malevolent people into the PC market to a fortune, leading to PC plate market confusion, uneven price, quality can be quite different, how to pick out in a large number of products to better quality PC board?
1、看是不是正軌PC陽光板廠家，在看代價，首先單從陽光板價格下去辨別。代價貴的自然就好，代價低的你吹的再天花亂墜都是假的。
1, see is not the right PC sunshine board manufacturers, look at the price, the first single price from the sun to distinguish. The cost of expensive nature, low cost and you blew as if it were raining flowers are false.
2、看產品的包裝：包裝雖然不能夠決定產品的質量，但是卻會折射出耐力板生廠廠家做事的態度，從而看出品質。
2, look at the product packaging: packaging, although not able to determine the quality of the product, but it will reflect the endurance board factory factory work attitude, so as to see the quality.
3、暴曬辨別：將耐力板放到陽光下暴曬，如果出現了發黃的情況，那么說明耐力板的質量不好。
3, exposure to distinguish: the endurance plate into the sun exposure, if there is the case of yellow, so that the quality of the endurance plate is not good.
4、燃燒測試：選擇一小塊耐力板進行燃燒，質量好的耐力板會遠離火源后熄滅。
4, combustion test: select a small endurance plate for combustion, the quality of the endurance board will be away from the fire out.
5、對表面進行觀察：你要揭開耐力板的保護膜，如果存在比較多的氣泡或是顆粒，那么說明耐力板的質量不好，有可能使用的材料中摻有回收的舊料;如果耐力板的表面沒有氣泡或是顆粒則說明耐力板的質量很好。第扯雖然這個也不完全是，但有點可以必定的就是好板。
5, to observe the surface: you must uncover the protective film sheet, if there are more bubbles or particles, so that the quality of endurance plate is not good, it is possible to use the material mixed with old material recycling; if there is no air bubbles or surface panel said the quality of Ming endurance plate particles very good. Although this is not entirely, but a little can be a good board.
6、還有一點最不好評價了，那就是PC板的耐候功能，有防紫外線共擠層的雖然好，悵惘肉眼難以辯白。
6, and most bad judgments, that is the PC board function of anti ultraviolet weathering, extrusion layer is good, wistful eye to apologize.
小編認為購買pc板的時候千萬不要貪圖便宜，因為為了降低成本很多不法廠家會在原料上做手腳，使用正規的原材料，pc板的價格不可能有太大的差距
Xiao Bian think when buying PC board do not covet cheap, because in order to reduce the cost of a lot of unscrupulous manufacturers will be on the raw materials to do the trick, the use of formal raw materials, PC board price can not be too big a gap
上一篇：PC陽光板可以在常溫下彎曲嗎？
