- 時間：2016-12-07 16:05:23
- 來源：本站
- 瀏覽次數：
信任運用PC板的客戶 都應該對PC板板材有點了解，通常質量的通常廠家質保5年，好點質量的，廠家大多質保八年或十年，可是，近期有有些客戶反映實習壽數達不到，畢竟要素安在？
Trust using PC board customers should know a little bit of PC board plate, usually quality usually manufacturers warranty five years, better quality, most manufacturers warranty for eight years or 10 years, however, recently, some customers reflect the good practice to reach, after all elements in?
對于PC板損壞的人為因素，非有必要需要思索以下幾方面：
For PC board damaged man-made factors, it is necessary to ponder the following several aspects:
1.加工差錯。很多客戶把PC板板材買回去往后都會把板材加工，可是在板材加工的進程中采用了差錯的辦法或不妥的加工東西，都會構成PC板的損害。
1. The machining error. Many customers buy a PC board plate back in the future will put the plate processing, but in the process of plate production USES the methods of error or improper processing, will constitute a PC board damage.
2.設備差錯。PC板工程設備時，很多施工人員在設備還沒完畢之前就損壞或撕掉了PC板里邊的保護膜，致使PC板材的表面損壞擦傷，須名PC板不并不耐磨，必需比及設備完畢前方可揭掉保護膜。
2. The device error. PC board engineering equipment, a lot of construction personnel in equipment damaged or torn off before haven't finished the PC board inside the protective film, the raw surface damage on the PC board, PC board must be known not wear-resisting, ratio and necessary equipment to complete the front may remove the protective film.
3.環境作用。很多客戶買了PC板回去往后就直接堆積，并沒有思索到附近的環境。板材在寄存的時分肯定要先知道附近的環境，切勿在分外濕潤的環境內貯存。而且PC板不耐酸堿，切勿與堿性或腐蝕性物質貯存在一起，因為PC板會與這些化學物質發生化學反應致使板材表面腐蝕。
3. The environmental effect. Many customers bought a PC board back he piled up directly in the future, not to think to the nearby environment. Sheet in time register must first know nearby environment, do not store in particularly humid environment. PC board is not resistant to acid and alkali, and not with alkaline or corrosive substances stored in together, because of the PC board will react with the chemicals as plate surface corrosion.
歸根到底，很多PC板所謂的運用壽數添加，更多是人為損害不妥構成的，因PC資料的特殊性，貯存及運送PC板時需要分外留心一些細節，
In the final analysis, a lot of PC board the use of so-called stature to add, artificial damage is more wrong, because of the particularity of PC material, storage and delivery of PC board need to be especially pay attention to some details,
